United States Department of Defense United States Department of Defense

News

American Forces Press ServiceBookmark and Share

 News Article

New Helmet Sensors to Measure Blast Impact

By Donna Miles
American Forces Press Service

FORT BELVOIR, Va., Jan. 7, 2008 – Soldiers from the 101st Airborne Division preparing to deploy to Afghanistan are being issued sensors that attach to their helmets to measure the impact from blasts, roadside bombs and other activities.

Click photo for screen-resolution image
U.S.Army Maj. William Schaffer in the Army’s Program Executive Office Soldier at Fort Belvoir, Va., displays a Kevlar helmet with an externally mounted sensor that collects blast data, and the sensor itself. The 101st Airborne Division is receiving the sensors before deploying to Afghanistan. Photo by Donna Miles
  

(Click photo for screen-resolution image);high-resolution image available.

About 1,200 “Screaming Eagles” already have the new sensors, and the rest will receive them within the next month, said Maj. William Schaffer, a product manager in the Army’s Program Executive Office Soldier, based here.

Meanwhile, troops from the 4th Infantry Division are scheduled to receive helmet sensors with similar capabilities before their deployment to Iraq this fall, Schaffer said.

The sensors gather data on impacts ranging from a dropped or kicked helmet to a vehicle crash to a nearby weapon firing or explosion, Schaffer explained. They measure two specific actions: the energy wave generated by the “event,” and the “acceleration” or jolt that follows.

In the short term, data collected through the sensors is expected to help the Army improve the helmets and other protective equipment it provides its soldiers, Schaffer said.

A longer-term application – one Schaffer emphasized the medical community isn’t yet ready for – is to use impact data to help diagnose traumatic brain injuries.

“With the number of IEDs that we’re seeing in Iraq and the traumatic brain injury that’s coming out of it, obviously somewhere down the line we are looking at correlating the blast and the injury,” he said. “But in the near term, we are looking at developing a more protective piece of equipment. The advanced combat helmet we have out there is the best in the world, but we are always looking at ways to make our products better, and this is a great way to start.”

Gen. Richard A. Cody, Army vice chief of staff, ordered the helmet sensor program in June. Three months later, the Program Executive Office Soldier had come up with several potential helmet sensors and was putting them through extensive testing at Aberdeen Proving Ground, Md.

Within six months of getting its marching orders, officials narrowed the field to the most promising models: one mounted externally and one internally. “We came up with two of the best sensors, and we’re now preparing to field both of those,” Schaffer said.

The model going to the 101st Airborne Division attaches to the back of the advanced combat helmet, protected by a hardened casing that is covered by a camouflage flap. It weights about 6 ounces and has a six-month battery life. The sensor remains in a “sleep” mode, automatically turning itself on and capturing data from an event, then turning itself off. It has enough memory to store data on 527 events.

To harvest information from the sensor, a soldier simply connects it to a computer using a USB port, hits “save” and sends the data to a secure database.

An internally mounted model to be fielded to the 4th Infantry Division sits under the padding in the crown of the helmet. It has a rechargeable battery, but otherwise has the same capabilities as the externally mounted sensor.

“One is protected by the helmet itself, and one by the hardened casing around it,” Schaffer said. “Both measure impact and acceleration.”

Initial input from 101st Airborne Division soldiers shows they are happy to play a part in helping the Army improve its helmet protection, Schaffer said. He noted that many of the soldiers have experienced blasts or accelerations during past deployments and recognize the value of the sensor technology in developing the next-generation combat helmet.

“This shows everybody that the Army cares,” Shaffer said. “We have got the best equipment in the world, but we are not resting on our laurels. We are always looking forward, always looking for the next generation of protective equipment to take care of the soldiers.”

Contact Author

Related Sites:
Program Executive Office Soldier

Click photo for screen-resolution imageA soldier models a Kevlar helmet with an externally mounted sensor like those being issued to the 101st Airborne Division at Fort Campbell, Ky., before its deployment to Afghanistan. The sensor collects blast data for use in developing next-generation protective gear. U.S. Army photo  
Download screen-resolution   
Download high-resolution


Click photo for screen-resolution imageThe 4th Infantry Division will receive an internally mounted helmet sensor before its deployment to Iraq this fall. Photo by Donna Miles   
Download screen-resolution   
Download high-resolution


Click photo for screen-resolution imageThe U.S. Army’s Program Executive Office Soldier pushed the concept of a helmet-mounted sensor able to collect blast data from concept to fielding in a record six months. The 101st Airborne Division is receiving the sensors before its deployment to Afghanistan. Photo by Donna Miles  
Download screen-resolution   
Download high-resolution


Click photo for screen-resolution imageSoldiers will be able to download data from their helmet-mounted sensors by connecting it to a USB port and into a computer. Photo by Donna Miles   
Download screen-resolution   
Download high-resolution



Top Features

spacer

DEFENSE IMAGERY

spacer
spacer

Additional Links

Stay Connected